 Get pricing information for Cylindrical Rings.
- All cylindrical Rings are manufactured to ASME/ANSI B47.1 AGD standard and ASME/ANSI B89.1.6.
- When Min and Max master rings (.005"/.125mm max spread) are ordered for setting variable gages, the quantity two price mat be used.
- All rings regardless of size are lapped to size and polished.
- Non gaging surfaces are black oxide and ring faces are surface ground.
- Roundness and taper to not exceed 50% of the applicable gagemaker’s size tolerance and are non-accumulative.
- Sizes available up to 28".
- The designs for cylindrical ring gages are described in ASME standard B47.1.
- Rings below 1.510" are manufactured without a flanged outer diameter.
- Available in Steel, Carbide or Chrome.
Large Flanged Ring Gages:
|
- Above 1.510" cylindrical rings are manufactured with a flanged diameter as pictured above.
- The removal of excess material from the outside diameter reduces weight for easier use by the operator.
- Available in Steel, Carbide or Chrome.
Jacketed Carbide Ring Gages:
|
- Pictured above is a "Jacketed Carbide" ring.
- The insert is solid Carbide with the outside jacketed with Steel.
- A solid Carbide ring would be heavy and subject to damage on the outside due to the carbide being hard and brittle.
|
|
