news & events | contact us | phone (800) 251-4243 |

 

 

WHERE TO BUY

Surve Please contact GS Gage for pricing.

We produce a large number of surveillance masters in all sizes. Below is a gallery and short description of the masters. If you would like to see prices, please see our pricing guide. Please choose from the following to see a description of our masters.

Micrometer Masters Vernier Caliper Depth Micrometer

Geometric Chek Masters Z Axis Chek Masters QUIKCHEK


GSG Micrometer Masters:#

GSG Micrometer masters are used to calibrate and set micrometers. The master is superior to gage block calibration because they do require block stacks and therefore it is much faster to inspect the linear range of the tool. In addition they indicate wear on the micrometer anvil because it replicates how the micrometer is used.


Model # 01-1E (English)
Model # 01-1M (Metric)

01-1 diameter is Stainless Steel to reduce wear and prevent rust. Hardened, stabilized, ground and lapped to +/-.0001. Comes complete with storage case.



Model # 16-1E (English)
Model # 16-1M (Metric)

1.00"-6.00" (25-150mm) diameter in 1.00" (25.0mm) increments. case hardened, stabilized, ground and lapped to +/-.0001 (
+/-.0025mm)



Model # 16-1/2E (English)
Model # 16-1/2M (Metric)

1/2-6.00 diameter in 1/2 increments 12.5-150mm diameter in 12.5mm increments Case hardened, stabilized, ground and lapped to +/-.0001 or +/-.0025mm.
Model # 112E (English)
Model # 112M (Metric)

1.00-12.00 diameter in 1.00 increments 25-300mm diameter in 25.0mm increments Case hardened, stabilized, ground and lapped to +/-.0001 or +/- .0025mm.

<< Return to the top of the page.


GSG Vernier Caliper Masters:#

GSG Vernier masters are used to calibrate and set Vernier calipers. The master is superior to gage block calibration because they do require block stacks and therefore it is much faster to the inspect linear range of the tool. In addition they indicate wear on the caliper anvils because both the ID and OD jaws are inspected without additional setup.


Model # VC-1E (English)

Model # VC-1M (Metric)

1.00-6.00 diameter in 1.00 increments for outside jaws, 1/2 to 4 1/2 inside jaws. +/-.0002, 25-150mm diameter in 25.0mm increments for outside jaws, 12.5 to 112mm for inside jaws +/-.005mm Case hardened, stabilized, ground and lapped to +/-.0002.

Larger sizes are available upon request.




<< Return to the top of the page.


GSG Depth Micrometer Masters:#

Model # ADM-E (English)

  • .5-5.50 in 1.00 steps +/-.0001
  • 6.5-11.50 in 1.00 steps +/-.0002

Model # ADM-M (Metric)

  • 12.5-137mm in 25.0mm steps +/- .0025mm
  • 162.5-287mm in 25.0mm steps +/-.005mm
  • Case hardened, stabilized, ground and lapped.


<< Return to the top of the page.

GSG Geometric Chek Master:#

GSG Geo Metric Chek masters are used to calibrate and set circular geometry systems. The master checks for perpendicularity (squarerness), parallelism, roundness and concentricity.


Model # GC-1

Master is supplied with complete certification for roundness, parallelism, perpendicularity and concentricity.

Supplied with storage box.




<< Return to the top of the page.


GSG Z Axis Chek Masters:#

GSG Z Axis Chek masters are used to calibrate and set the z axis on optical measuring machines. The master is superior to gage block calibration because they do require block stacks and therefore it is much faster to inspect linear range of the machine.


Model # LX-1 (lapped)
Model # GX-1 (ground)

  • LX-1 Lapped with Mirror Finish.
  • GX-1 Ground finish for less reflection.
  • Supplied with Certification and storage box.





<< Return to the top of the page.


GSG QUIKCHEK:#

GSG QUIKCHEK is used to calibrate Coordinate Measuring Machines (CMM). The QUIKCHEK provides an easy periodic check on the CMM to ensure it is within calibration and providing you with accurate readings. In addition it provides a more volumetric inspection of a CMM than the traditional ball bar.


Model 8 Inch
Model 16 Inch


The QUIKCHEK is your mechanical assurance of CMM accuracy. The QUIKCHEK is 440c stainless steel hardened to Rc 60-62, stress relieved and triple stabilized . Supplied with certification and case.

Special sizes available at contact factory.









<< Return to the top of the page.

HOME | OUR PRODUCTS | PRICING | ABOUT GSG | WHERE TO BUY | TECHNICAL RESOURCES LOCATION | SITEMAP | PRIVACY POLICY | TERMS & CONDITIONS | CONTACT
Copyright 2016 Glastonbury Southern Gage. All Rights Reserved.